Tag Archives: STARFIELD

Moondrop Aria Review – Reimagined

Pros –

Strong balance and linearity, Outstanding midrange timbre, Impressive metal build, Wide soundstage, Well-detailed

Cons –

Bass could still be tighter, Average noise isolation

Verdict –

Moondrop’s latest earphone appends complaints with their former design whilst retaining benchmark level tonal refinement at a substantial price cut.


Introduction –

Like many, my first introduction to Moondrop was the Starfield, an earphone that combined their Harman-based VDSF target tuning with a CNT dynamic driver at an affordable price. While I found the earphone to impress in both its build quality and the refinement of its tonality, I did find myself wanting when it came to technical performance. The Aria is the latest offering in Moondrop’s single-DD arsenal, promising to build upon the same foundation of the Starfield. It implements a smart all-black colour scheme and revised driver and surrounding acoustics in order to realise this. Furthermore, the Aria comes at a substantial discount. Of note, some sources refer to this model as the Aria 2 as Moondrop have previously released a single-DD Aria. For the sake of consistency, I will refer to this model simply as the Aria during this review.

You can read more about the Aria and treat yourself to a set on HiFiGO and Apos Audio.

Disclaimer –

I would like to thank Nappoler from HiFiGO very much for his quick communication and for providing me with the Aria for the purpose of review. All words are my own and there is no monetary incentive for a positive review. Despite receiving the earphones free of cost, I will attempt to be as objective as possible in my evaluation.

Contents –

Specifications –

  • Driver: LCP 10mm Dynamic Driver
  • Socket: 0.78mm 2-pin
  • Sensitivity: 122dB
  • Frequency Response: 5Hz – 36kHz

Behind the Design –

Revised Driver and Acoustics

The Aria takes the brass inner cavity and CCAW voice coil of the Starfield and adds stronger N52 Neodymium magnets in addition to a revised LCP (liquid crystal polymer) diaphragm. A newly designed phase waveguide aids treble response and minimises distortion. Moondrop achieve their desired frequency response via implementation of a composite sound cavity, multiple acoustic dampers and numerous tuning ports.

HRTF Frequency Response

The Aria’s frequency response is compliant with Head-related transfer function and room response function. This enables the earphone to provide accurate imaging and localisation. Moondrop’s target curve is a derivative of the diffuse-field neutral and Harman curves – more specifically, compared to Harman-target earphones, Moondrop have toned down the upper-midrange and slightly bumped up the lower-treble. As with the Starfield, I find this to create a very pleasant tonality with a natural-timbre that is increasingly common but not nearly a given in this price range.

Unboxing –

Leveraging their huge success, the cheaper Aria provides a far more prestigious unboxing experience than the pricier starfield before it. An outer sleeve slides off to reveal a magnetic rubberised hard box with foil print. Inside are the earphones within a foam inlet with the zipper carrying case identical to that included with the Starfield just below. The case contains a 2-pin fabric-sheathed braided cable in addition to a whopping 6 pairs of silicone ear tips. What we do miss relative to the Starfield are the tweezers and replacement mesh nozzle covers. Overall, while the accessory set is almost identical to the Starfield, the experience has been elevated by a large degree.

Design –

The Aria is almost identical to the Starfield with a very similar two-piece metal chassis and identical inner half retaining the same in-ear feel between the two. As before, the housings have a nice heft and density alongside impressive tolerances and finish with a palpable seem but rounded edges and corners. The Aria actually appears to have stepped up tolerances slightly from the Starfield, and employs a new flat faceplate design in addition to introducing a more tactile matte finish. In addition, where the Starfield’s painted finish garnered complaints of chipping, the new matte complexion is promised to be harder wearing. Overall, the Aria looks smart with its subtle gold accents and the metal construction rewards with excellent in-hand feel.

The cable has also been revised relative to the Starfield though retains the same 0.78mm 2-pin interface with wide aftermarket support. As opposed to the Litz braided cable that came before, the Aria has a fabric sheathed cable that is only braided below the y-split. It feels a little light and flimsy above the y-split compared to the prior design but is soft and flexible with minimal microphonic noise transmission. The y-split is low-profile and the right-angle plug is both case-friendly and well-relieved. While the cable has some memory, and I do personally prefer the more supple Litz wire, it isn’t too prone to tangling, has a great aesthetic and is easy to live with day to day.

Fit & Isolation –

Given that the portion of the housing that contacts the ear is identical, the fit experience very much mirrors that of the Starfield and models that came before such as the KXXS. This is not a bad thing, for these earphones are all shapely and comfortable to wear. The nozzles are tapered with a nice angle that positions the housing neutrally in the ear to minimise hotspots. The housings are thin so the fit is reasonably low-profile. They’re not ideal to sleep on but are certainly sleek and unassuming in addition to being relatively resistant to wind noise when worn outdoors. There is no driver flex due to their more open-feel with minimal wearing pressure and a shallower fit depth. This is also likely due to the obvious venting which means isolation is below average and not ideal for listening in noisy areas. They do suffice for general commute but I would investigate fully-sealed options for frequent travellers.

Next Page: Sound Breakdown

The post Moondrop Aria Review – Reimagined first appeared on The Headphone List.

Original Resource is The Headphone List

Moondrop Blessing 2 Review – All The Boxes

Pros –

Very linear tuning, Outstanding detail retrieval, Excellent imaging and separation, Impressively source agnostic, Great design and cable

Cons –

Larger housings, Slightly strained upper-midrange, Slightly thin lower-treble

Verdict –

Few competitors create as well-rounded a package as the Blessing 2, this is a balanced and refined earphone that punches well above its asking price.


Introduction –

If you frequent any kind of audio for a, you will be well acquainted by now with Chinese cult-hit Moondrop. For the company has achieved huge renown in a very short time, no small feat, with their excellent VDSF tuning based on the coveted diffuse field neutral curve. The Starfield assumed such a tuning, that permit surprising refinement at a reasonable price. However, though tonality impressed, the quality of the driver did leave me wanting. The Blessing 2 looks like a fine solution, assuming a very similar tuning realised through an elaborate 5-driver hybrid setup. The Blessing 2 implements 3D printing for physical band and low-pass filtering used in conjunction with electronic RC filtering to deliver a phase-coherent 3-way setup and very specific control over the frequency response. That’s a load of engineering for a midrange IEM.

The Blessing 2 retails for $319 USD. You can read more about it and purchase one for yourself on HiFiGO and Apos Audio.

Disclaimer –

I would like to thank Nappoler from HiFiGO very much for his quick communication and for providing me with the Blessing 2 for the purpose of review. All words are my own and there is no monetary incentive for a positive review. I paid a slightly reduced cost for the earphones in return for honest evaluation and will attempt to be as objective as possible.

Specifications –

  • Impedance: 22 ohms @ 1 kHz (+/- 15%)
  • Drivers: 1 Dynamic Driver & 4 Balanced Armatures on each side
  • Frequency Response: 9 Hz – 37 kHz
  • Effective Frequency Response: 20 Hz – 20 kHz
  • Treble Driver: Knowles SWFK
  • Midrange Driver: Softears D-MID-A
  • Bass Driver: 10mm Paper Cone Diaphragm Coil
  • Quality Control Range: +/- 1 dB @ 1 kHz
  • Sensitivity: 117 dB/Vrms @ 1 kHz
  • THD: <1% @ 1 kHz
  • Interface: 0.78 mm – 2 pin

The Pitch –

Hybrid Acoustic and Electronic Filters

The Blessing 2 implement physical band-pass filtering that isolates one pair of the BA drivers to exclusively cover the midrange frequencies. The BA drivers are a custom 2 in one unit from Soft Ears Japan tuned to their specifications. Similarly, Moondrop use a physical low-pass filter to limit the DD to bass under 400Hz in addition to controlling pressurization. An electronic RC filter is also utilised to reinforce this. SFWK tweeters provide extended high-frequencies and special attention was given to unite the sensitivities of all drivers acoustically rather than electronically for a phase-coherent design.

VDSF Tuning

Neutral has become a more subjective term over the years as more minds contribute to different curves simulating different acoustic environments. Most famous are the Diffuse and newer Harman curve, both have their share of fans and critics. Moondrop’s first IEMs traced the Harman Curve incredibly well, a selling point for the company and sound foundation for developing their own curve called virtual diffuse sound field (VDSF). Similar to its name, this is Moondrop’s appropriation of the diffuse-field neutral curve, not the Harman Curve. Comparatively, they’ve toned down the highs and upped the bass which is, to my ear, a combination between the two aforementioned curves. Though both diffuse-field and Harman are considered by most critics not to showcase great balance, the VDSF curve is a refined and mostly natural-sounding tuning that is a very effective mashup.

Unboxing –

Moondrop always package their products professionally and the Blessing 2 is no exception. The outer sleeve houses specifications and Moondrop’s famous anime splash art. Inside is a clean grey box adorned with Moondrop’s logo. Opening the box reveals the carrying case and separate card box with additional accessories. The earphones are protected within a foam inlet inside the zippered case, it has a nice textured vinyl exterior in svelte grey and ample interior space for the earphones and a small DAP too.

The box contains the rest of the accessories, a 6n OFC Litz cable, airline adapter, papers and 6 pairs of silicone ear tips. The tips have an interesting design, the bore fits exactly onto the Blessing 2’s nozzles but the size of the sound output has been reduced likely to slightly attenuate high frequencies and create a more balanced sound.

Design –

The Blessing 2 is a very attractive earphone to my eye, an impression enhanced by a certain amount of customisability on the user’s end. The 3D printed shells are as you’d expect; perfectly smooth, seamless and unibody, they’re also resin-filled for a nice quality heft in the hand. Meanwhile, the transparent design showcases the acoustics inside and driver setup, you can study them for hours. This is topped with CNC machined faceplates with a brushed finish. Buyers are able to order wooden variants and custom artwork for an additional $30, or choose from 8 set options provided by Moondrop.

The cable too inspires confidence, I’ve personally had a great experience here. Up top, they utilise a standard 0.78mm 2-pin connector with wide aftermarket support. It’s a 4-core braided unit with soft, smooth jacket and very supple feel, the cable is slightly thin but feels well anchored at all terminations. There’s also zero memory so the cable isn’t too tangle-prone, and it conducts minimal microphonic noise. The well-relieved right angle plug and metal Moondrop y-split cover add a premium feel while the pre-moulded ear guides provide a comfortable and stable fit. I personally enjoy the contrast created between the copper cable and silver housings.

Fit & Isolation –

If there’s one thing that may polarise about the Blessing 2’s design, it’s likely the fit. They are ergonomic in their design for sure, but definitely also on the larger side. They aren’t ridiculously proportioned nor do any design decisions come at the cost of ergonomics. This is a rounded, smooth and generally comfortable design with well-angled nozzles that promote a deeper, more stable fit and strong seal. I didn’t experience any hotspot formation, albeit due to the size, they don’t disappear in the ear. Those with smaller than average ears may experience difficulties due to the height of the earphone as the tops lock-in somewhat to the anti-helix area.

With the right tips, they achieve a deep and comfortable fit. In turn, though reasonably large and quite wide, the fit is lower-profile, hugging the contours of the ear. You can’t sleep on them due to the width but wind noise is not too bad despite the presence of a faceplate vent. Similarly, isolation is well above average and easily suitable for commute and public transport. You would benefit from a fully-sealed design in especially noisy areas such as the metro or air travel, but the Blessing 2 is passable here too, especially with foam tips.

Next Page: Sound, Comparisons & Verdict

The post Moondrop Blessing 2 Review – All The Boxes first appeared on The Headphone List.

Original Resource is The Headphone List